תאימות אלקטרומגנטית - מארזים מסוככים וציוד בדיקה צבאי ואזרחי

על מנת היכולת של ציוד (רכיב, מכשיר, מערכת) לפעול באופן תקין בסביבתו המיועדת ללא ירידה בביצועים עקב הפרעות אלקטרומגנטיות הנובעות מהסביבה, וכן מבלי לגרום להפרעות אלקטרומגנטיות העלולות לשבש ציוד אחר בתחום התא"מ, האווירה האלקטרומגנטית, תקנים לתאימות אלקטרומגנטית. יש לפעול בהתאם לתקנים הרלוונטיים המופיעים מטה.

ציוד מדידה לקוי ייצור למוצרים צבאיים

MIL עבור מעבדות תאימות אלקטרומגנטיות בחזית הטכנולוגיה עבור תקנים צבאים MIL STD בדיקות חשמליות בתחום ה RF במעבדה, מושגים ויחידות בתחום התא"מ, תקנים לתאימות אלקטרומגנטית. מודלים של הפרעות. סינון קווי אספקות, אותות ובקרה.

סיכוכים:

חסינות המוצר להפרעות חיצוניות. שיטות מדידה של EMC-EMI, בדיקות Pre Copmliance ו- Compliance.

לחברת דולב ניסיון רב בפיתוח ויצור מוצרים בתחום הביטחוני / צבאי עבור ותעשיות ביטחוניות מובילות. ציוד בדיקה, מתקני בדיקה ייחודיים לקוי ייצור כמו:

  • מארזים מסוככים
  • אזורים נקיים מהפרעות אלקטרומגנטיות
  • הכרת דרישות לתקנים צבאיים

קרא עוד: תקן קרינה אלקטרומגנטית | מדידת קרינה

European / International Standards

European Standard

International Standard

Remark

EN 50065

None

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz

Part 1: General requirements, frequency bands and electromagnetic disturbances

Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

EN 50081

None

Electromagnetic compatibility

Generic emission standard

Part 1: Residential, commercial and light industry

Part 2: Industrial environment

EN 50082

None

Electromagnetic compatibility

Generic immunity standard

Part 1: Residential, commercial and light industry

EN 50083

None

Cable networks for television signals, sound signals and interactive services

Part 2: Electromagnetic compatibility for equipment

EN 50091

None

Uninterruptible power systems (UPS)

Part 2: EMC requirements

EN 50130

None

Alarm systems

Part 4: Electromagnetic compatibility

Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

EN 50148

None

Electronic taximeters

EN 50199

None

Electromagnetic compatibility (EMC)

Product standard for arc welding equipment

EN 50263

None

Electromagnetic compatibility (EMC)

Product standard for measuring relays and protection equipment

EN 50270

None

Electromagnetic compatibility

Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

EN 50293

None

Electromagnetic compatibility

Road traffic signal systems

Product standard

EN 50295

None

Low-voltage switchgear and control gear

Controller and device interface systems

Actuator Sensor interface (AS-i)

EN 50370

None

Electromagnetic compatibility (EMC)

Product family standard for machine tools

Part 2: Immunity

EN 55011

CISPR 11

Industrial, scientific and medical (ISM) radio-frequency equipment

Radio disturbance characteristics

Limits and methods of measurement

EN 55012

CISPR 12

Vehicles, boats and internal combustion engine driven devices

Radio disturbance characteristics

Limits and methods of measurement for the protection of receivers except those installed in the vehicle / boat / device itself or in adjacent vehicles / boats / devices

EN 55013

CISPR 13

Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment

Sound and television broadcast receivers and associated equipment

Radio disturbance characteristics

Limits and methods of measurement

European Standard

International Standard

Remark

EN 55014

CISPR 14

Electromagnetic compatibility

Requirements for household appliances, electric tools and similar apparatus

Part 1: Emission

Part 2: Immunity - Product family standard

EN 55015

CISPR 15

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN 55020

CISPR 20

Electromagnetic immunity of broadcast receivers and associated equipment / Sound and television broadcast receivers and associated equipment

Immunity characteristics

Limits and methods of measurement

EN 55022

CISPR 22

Information technology equipment

Radio disturbance characteristics

Limits and methods of measurement

EN 55024

CISPR 24

Information technology equipment

Immunity characteristics

Limits and methods of measurement

EN 55103

None

Electromagnetic compatibility

Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use

Part 1: Emission

Part 2: Immunity

EN 60034

IEC 60034

Rotating electrical machines

Part 1: Rating and performance

EN 60204

IEC 60204

Safety of machinery

Electrical equipment of machines

Part 31: Particular safety and EMC requirements for sewing machines, units and systems

EN 60439

IEC 60439

Low-voltage switchgear and controlgear assemblies

Part 1: Type-tested and partially type-tested assemblies

EN 60521

IEC 60521

Class 0,5, 1 and 2 alternating-current watt-hour meters

EN 60669

IEC 60669

Switches for household and similar fixed-electrical installations

Part 2: Particular requirements

Section 1: Electronic switches

Section 2: Electromagnetic remote-control switches (RCS)

Section 3: Particular requirements - Time-delay switches (TDS)

EN 60687

IEC 60687

Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)

EN 60730

IEC 60730

Automatic electrical controls for household and similar use

Part 1: General requirements

Part 2-5: Particular requirements for automatic electrical burner control systems

Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Part 2-7: Particular requirements for timers and time switches

Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

Part 2-9: Particular requirements for temperature sensing controls

Part 2-11: Particular requirements for energy regulators

Part 2-13: Particular requirements for humidity sensing controls

Part 2-14: Particular requirements for electric actuators

Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements

EN 60870

IEC 60870

Telecontrol equipment and systems

Part 2: Operating conditions

Section 1: Power supply and electromagnetic compatibility

EN 60945

IEC 60945

Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results

EN 60947

IEC 60947

Low-voltage switchgear and control gear

Part 1: General rules

Part 2: Circuit-breakers

Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

Part 5-2: Control circuit devices and switching elements - Proximity switches

Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behavior under fault conditions (PDF)

Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

Part 5-7: Control circuit devices and switching elements -Requirements for proximity devices

 

 

European Standard

International Standard

Remark

EN 60974

IEC 60974

Arc welding equipment

Part 10: Electromagnetic compatibility (EMC) requirements

EN 61000

IEC 61000

Electromagnetic compatibility (EMC)

Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection

Part 4-1: Overview of EMC Immunity Tests

Part 4-2: Electro-static Discharge Immunity; ESD

Part 4-3: Immunity to Radio Frequency EM-Fields; RF Radiated Field

Part 4-4: Electrical Fast Transient / Burst Immunity

Part 4-5: Surge (Mains) Immunity

Part 4-6: Immunity to Conducted Disturbances Induced by Radio Frequency Fields; RF Conducted

Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

Part 6-2: Generic standards - Immunity for industrial environments

Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

Part 6-4: Generic standards - Emission standard for industrial environments

EN 61008

EC 61008

Electrical accessories - Residual current operated circuit-breakers without integral over-current protection for household and similar uses (RCCB's)

Part 1: General rules

EN 61009

IEC 61009

Electrical accessories - Residual current operated circuit-breakers with integral over-current protection for household and similar uses (RCBO's)

Part 1: General rules

EN 61036

IEC 61036

Alternating current static watt-hour meters for active energy (classes 1 and 2)

EN 61037

IEC 61037

Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers

EN 61038

IEC 61038

Electricity metering - Tariff and load controls - Particular requirements for time switches

EN 61131

IEC 61131

Programmable controllers

Part 2: Equipment requirements and tests

EN 61204

IEC 61204

Low voltage power supplies, d.c. output

Part 3: Electromagnetic compatibility (EMC)

EN 61268

IEC 61268

Alternating current static var-hour meters for reactive energy (classes 2 and 3)

EN 61326

IEC 61326

Electrical equipment for measurement, control and laboratory use - EMC requirements

EN 61543

IEC 61543

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

EN 61547

IEC 61547

Equipment for general lighting purposes - EMC immunity requirements

EN 61800

IEC 61800

Adjustable speed electrical power drive systems

Part 3: EMC product standard including specific test methods

EN 61812

IEC 61812

Specified time relays for industrial use

Part 1: Requirements and tests

EN 62052

IEC 62052

Electricity metering equipment (AC) - General requirements, tests and test conditions

Part 11: Metering equipment

EN 62053

IEC 62053-

Electricity metering equipment (a.c.) - Particular requirements

Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

Part 21: Static meters for active energy (classes 1 and 2)

Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

Part 23: Static meters for reactive energy (classes 2 and 3)

EN 12015

None

Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors – Emission

EN 12016

None

Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity

EN 12895

None

Industrial trucks - Electromagnetic compatibility

EN 13309

None

Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply

EN 300 386

None

Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements

EN 300 386-2

None

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network

EN ISO 14982

None

Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

EN 50147-1  

 IEEE Std 299-1997

IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures

This standard provides uniform measurement procedures for determining the effectiveness of electromagnetic (EM) shielding enclosures at frequencies from 9 kHz to 18 GHz
(extendable down to 50 Hz and up to 100 GHz).

MIL-STD-285

ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS, MEASUREMENTS OF

MIL-STD-461C

ELECTROMAGNETIC EMISSION AND SUSCEPTIBILITY REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE.

MIL-STD-462

ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS, MEASUREMENTS OF ELECTROMAGNETIC INTERFERENCE

 

פורסם ב:24.07.2019 | shiran